性饥渴的黄蓉与老汉

Main enamel reaction tank, enamel equipment, agitator
Always follow the principle of reliable quality and customer first

Manufacturing technology of enamel reactor

Number of hits:    Update time: 21 / 12 / 09 16:57:12 Source: www.zbshebei. cn close Sharing:
Many people will also be curious about how the enamel reactor, which often deals with various chemical products and has strong milk corrosion performance, is made. In the following contents, we will introduce its manufacturing process in detail. Through its production process, we can learn more about it:
1. Firstly, press the steel plate into a baffle plate which meets the firing requirements with the mould, and its cross section is similar to the letter "Ω". The width of the baffle plate h is 1 / 8 ~ 1 / 6 of the diameter of the kettle body, and the arc radius of the top surface of the baffle is 3 δ ≤R≤150mm, δ According to the volume of the enamel reactor, the baffle plate is made into one or more layers, which are welded on the inner wall of the reactor. After the weld is treated smoothly, it is enameled and assembled into finished products. The flow state of the reaction material is changed and the reaction efficiency is improved.
2. The enamel reactor materials are basically high-quality steel plate, welding rod and enamel. The steel plate electrode contains low impurities of carbon, sulfur and phosphorus. The lattice structure of the steel plate is compact and there are trace elements to inhibit hydrogen absorption in the manufacturing process. The glaze with good corrosion resistance, excellent temperature change resistance and low melting point is selected.
3. Enameling is also an important work. Generally, there are no pores after three times of enameling. The subsequent three to four times of enameling only thickens the porcelain layer. More than half of the thickness of the porcelain layer is dense and non-conductive. Such a porcelain layer has excellent corrosion resistance. Even if the thickness of the porcelain layer is reduced after corrosion, friction and collision, the performance of the porcelain layer will not be affected.
It can be seen from this that the manufacturing process of enamel reactor is not difficult. In the production process, there will be some links, and the inspection will be carried out at any time in the whole production process to ensure that the quality after production meets the requirements and can be put into production.

性饥渴的黄蓉与老汉_男朋友像疯了一样要我_昨晚他怎么弄你

http://31.juyouguo.cn http://07.juyouguo.cn http://17.juyouguo.cn http://32.juyouguo.cn http://69.juyouguo.cn http://73.juyouguo.cn http://49.juyouguo.cn http://23.juyouguo.cn http://71.juyouguo.cn http://76.juyouguo.cn http://41.juyouguo.cn